Passez votre commande maintenant sans payer de frais d'expédition en ce moment. Commandez aujourd'hui et profitez-en! (*=montant min.)
999,-
999,-
Dynacord Dlite D15-3
With the newly designed D15-3, DYNACORD fulfi lls a longtime customer demand for a light-weight, extremely robust high-performance professional 15“ 3-way plastic cabinet for use in professional, portable and fixed install sound reinforcement applications.
729,-
729,-
JBL JRX118SP
For those who prefer the simplicity of a self-powered subwoofer, there's the JBL JRX118SP 18" Compact Powered Subwoofer Cabinet.The JBL JRX118SP powered subwoofer incorporates a specially designed amplifier with 500 watts peak and 300 watts continuous power output into the same driver as the non-powered version. It offers a built-in stereo crossover network and peak limiter to protect the amplifier and speaker from clipping. The JRX118SP is designed with a JBL 18" woofer with a cast frame and 3" voice-coil. To minimize distortion due to coil saturation, heavy gauge wire is used for inductors and SonicGuard high-frequency driver protection guards against damage caused by inadvertent overpowering of the system. It features 1/4" and speakon connectors.
455,-
455,-
Dynacord Dlite D8
The D 8 is a light-weight, robust 8“/1”, 2-way plastic cabinet for professional sound reinforcement applications. With a variety of suspension accessories and conservative cosmetics, the D 8 is ideally suited to be used in demanding fixed installations.
269,-
269,-
JBL JRX115
The JBL JRX115 15" 2-Way Speaker Cabinet is ready for your live music or PA needs. 2-way system with 15" woofer, 2" coil compression driver with 1" exit, and a 90 degree x 50 degree horn. Trapezoid design. The JRX115 is road-tough and has the renowned JBL sound. If they can't deliver, neither can you. You work hard on your music and you want your audience to hear all of it. JBL's JRX15 provides uncompromising sonic performance so you can be sure the crowd gets the full experience, just the way you intended.
749,-
749,-
Dynacord DLite Sub 112
DYNACORD´s SUB 112 is a vented, direct radiating cabinet, equipped with the high-power DYNACORD DND12S400 neodymium transducer. The conical vent system shows significantly less distortion and lower air noise at low frequencies than common circular vent openings.
295,-
295,-
Electro Voice ZX1
The Electro-Voice® ZX1 is a high-performance, compact loudspeaker with a lightweight, durable, high-tech enclosure. The ZX1's enclosure geometry has been engineered to provide maximum rigidity and acoustic performance. The velocity compensated port design overcomes the limitation of many small loudspeakers and enables exceptional low-frequency response without vent noise. The ZX1’s long excursion, high-output, eight-inch woofer with weather-treated cone delivers smooth, low-frequency performance with exceptional reliability. A sophisticated crossover network integrates the ZX1 with the EV DH2005, a one-inch, exit-true compression driver with extended frequency response and high-output capability. Full-bandwidth overload protection is provided for reliable, long-term operation without audible effect.
1150,-
1150,-
Dynacord DLite Sub 115
DYNACORD´s SUB 115 is a vented direct radiating cabinet, equipped with the high-power Electro-Voice EVS15S transducer. The new High-Speed-Laminar-Vent system (patent pending) shows signifi cantly less distortion and lower air noise at low frequencies than common vented cabinets. The SUB 115 has the same dimensions and cosmetics as the powered PowerSub 315 and can directly be connected to the PowerSub 315 for an extended bass fundament. For this application you have to shift the PowerSub 315’s ‘mode switch’ to the position ‘internal+external 2*500W’.The SUB 115 contains a passive fi lter that suppresses high frequencies. Appropriate fullrange cabinets, e.g. DYNACORD’s D12, can therefore be directly connected in parallel to the SUB 115 if an extended bass reproduction is required. You just have to connect the SUB 115 and the fullrange cabinet with a regular Speakon cable. The cabinet is equipped with an electronic circuit called voice coil tracking protection. This circuit senses the terminal voltage of the transducer and simulates the thermal behaviour of the woofer´s voice coil. In case of potential thermal overload the power applied to the speaker is reduced to a safe level. Extremely powerful amps can be used in order to have maximum dynamic range without the danger of thermal overload in non-controlled situations. The voice coil tracking protection exhibits “soft” switching characteristics, so no annoying clicks or pops are audible. The circuitry automatically resets after the voice coil temperature has reached a safe value.
467,-
467,-
JBL JRX118S
The JRX118S is an 18" compact direct-radiation subwoofer designed to supplement and extend low frequency performance of full-range systems in live sound and music playback applications. The JRX118S is driven by a massive JBL 18" woofer with a cast frame and 3" voice-coil. It’s rated at 350 watts (continuous) and 1400 watts (peak) – based on JBL Professional’s 100 hour extended life test.
299,-
299,-
HK Audio Elements E435 Cabi…
The E 435 mid/ high unit is loaded with four 3.5" high-performance speakers developed specifically for ELEMENTS. These four vertically arrayed speakers achieve a very even pattern of throw, with the volume, frequency spectrum, and audio image remaining uniform throughout the audience area. One column may comprise up to four mid/ high units, which are quickly and reliably connected via E-Connect.
639,-
639,-
Dynacord DLite D12
With the newly designed D12, DYNACORD fulfills a longtime customer demand for a light-weight , extremely robust highperformance professional 12“ 2-way plastic cabinet for use in professional, portable and fixed install sound reinforcement applications.
159,-
159,-
Behringer B215XL
Enceinte de sonorisation 2 voies de 1000 watts avec woofer 15" et moteur à compression 1,75" en titane.
125,-
125,-
Tannoy Reveal 601P
Whether you’re looking to equip your studio with an industry standard reference monitor without the excessive price tag, or you need a passive monitor with a small footprint to integrate into your existing amplified system, the Reveal 601p offers the perfect solution. Built to the same superior standard as the active versions of the new Reveal range, the Reveal 601p packs performance, accuracy and value into a compact enclosure. Priced competitively with the serious home or project studio setup in mind, the all new Reveal 601p delivers a wide bandwidth performance that will impress even the most seasoned pro.
The low distortion 6.5” LF/MF driver voicing has been enhanced to deliver a natural and accurate ultra-linear response in the low and midrange frequencies, while the wide bandwidth tweeter extends the amplitude response beyond the 20kHz audibility threshold to 30kHz to improve the phase response within the audible band. This preserves the harmonic structure of sounds and the stability of the stereo image, ensuring stunningly accurate mix translation. Response has been optimised for quarter space near field operation, such as on a meter bridge or on a table either side of your control surface, while HF trim control allows fine tuning.
The rigid MDF cabinet construction provides stiffness and minimises colouration, while internal bracing of the sides and rear against the back of the bass driver provides a rigid reactive mass for the moving cone assembly; this ensures fast tight bass response and clear midrange. The curved edged design of the front baffle helps eliminate diffraction, while the front-firing bass port avoids the problem of exaggerated bass response as a result of boundary-coupling – a pitfall inherent with rear-firing designs when positioned close to a wall. The new elliptical tweeter waveguide has also been optimised to control high frequency directivity and minimise diffraction, ensuring a wide and even sweet spot.
Price per piece.
329,-
329,-
HK Audio Premium PRO 10X
This remarkably versatile 10'/1' enclosure can serve as a satellite, a fullrange cabinet, and a low-profile wedge monitor. The Music/Speech knob adjusts its finely balanced and therefore feedback-resistant frequency response to suit the given application.
379,-
379,-
HK Audio Premium PRO 15
Sporting a 15' woofer, this cab delivers performance on par with the PR:O 12, plus enhanced low-midrange and bass response compared. And that makes it a great choice for stand alone deployment without a subwoofer.
525,-
525,-
HK Audio Premium PRO 18 SUB
Boasting an 18' woofer in a bass reflex housing, this bin delivers a low-ranging bass foundation. The specially designed active stereo x-over routes the right frequency spectrum to the mid/ high unit connected via the Satellite Out.
218,-
218,-
Adam A3X
At the same time as ADAM´s brand-new AX-Series sees the light of the day, Harmony Central, one of the most famous online community for musicians in the US, gave the starting shot for reviewing this promising line of products. The A3X, smallest member of ADAM´s continually growing product familiy, was checked out by Jon Chappell. Price per piece.
539,-
539,-
HK Audio Elements E110 Sub
The passive E 110 Sub subwoofer is equipped with the same the high-performance 10" woofer as its active sibling. Plug a two-wire speaker cord equipped with Speakon connectors into the NL4 port on the rear panel to connect it straight to an active E 110 Sub A subwoofer or a separate EA 600 amp. The passive and active subwoofers’ enclosures are identical, so they can easily be combined to form one cohesive acoustical unit. The integrated E-Connect coupler on the subwoofer’s top panel also serves as a pole mount for further EP 1, EA 600, and E 435 modules.
944,-
944,-
Yamaha DSR112
La DSR112 est l’enceinte universelle 2 voies la plus polyvalente et la plus compacte de la Série DSR. Active, elle peut générer un niveau maximal de pression sonore de 134 dB SPL crête, et convient parfaitement à nombre d’applications en sonorisation portable et en installation. Idéale pour une utilisation en façade ou en retours de scène, la DSR112 possède aussi des points d’accroche M10, pour des applications en suspension.
599,-
599,-
Alto SX112 APX1000 Set
A great set of two passive 2-way 12" speakers and the APX1000 2-Channel Power Amplifier. The TOURMAX SX112 delivers a big sound with a high-performance 12-inch LF driver (2-inch voice coil), and an exacting 1-inch HF driver. What's more, it utilizes a trapezoidal design which greatly decreases the resonance of the standing wave in the cabinet for a more true and exact sound reproduction. The TOURMAX SX112 is the perfect solution for club installations, rehearsal spaces, gigging musicians, mobile DJs, and houses of worship who need additional sound reinforcement. The APX1000 delivers continuous, clean, stereo power to any live performance. Whether you are a sound contractor, gigging musician or live sound engineer, you need consistently clean power from your power amplifiers and the APX1000 brings it to every performance. The APX1000 provides a continuous 2 x 250W at 8ohms, or 2 x 500W at 4 ohms. In bridged mono mode, the APX1000 pumps out 1000 crystal-clear watts of power. Weighing in at only 12.1 lbs., the APX1000 goes into venues with amazing ease and convenience whether used in a permanent installation or portable application. The incredible power-to-weight ratio and performance quality of the APX 1000 means you'll get solid Class D power without breaking your back or your wallet
719,-
719,-
Alto SX115 APX1500 Set
A great set of two passive 2-way 15" speakers and the APX1500 2-Channel Power Amplifier. The TOURMAX SX115 delivers a big sound with a large, high-performance 15-inch LF driver (2.5-inch voice coil), and an exacting 1-inch HF driver. What's more, it utilizes a trapezoidal design which greatly decreases the resonance of the standing wave in the cabinet for a more true and exact sound reproduction. The TOURMAX SX115 is the perfect solution for club installations, rehearsal spaces, gigging musicians, mobile DJs, and houses of worships who need additional sound reinforcement. The APX1500 brings dependable, continuous, clean stereo power to any live performance. If you are a sound contractor, gigging musician or live sound engineer in need of a strong amp that provides consistently clean power, the APX1500 is perfect. The APX1500 provides 2 x 350 at 8ohms, or 2 x 550 at 4 ohms. In bridged mono mode, the APX1500 pumps out 1500 crystal-clear watts of power. Because it is class D, you get all the purity reliability of a professional amp without breaking your back just to lift it. Weighing in at only 12.1 lbs., the APX1500 goes into venues with amazing ease and convenience whether used in a permanent installation or portable application.
338,-
338,-
RCF ART 310
L'ART 310 est un haut-parleur passif 10" l'idéal pour les installations. Grâce à l'haute qualité des transducteurs néodyme et au cabinet compact, il est l'haut-parleur où la sortie d'un système de sonorisation et la dimension d'un écran est nécessaire. Le woofer 10 "est équipé d'une bobine de 2,5" avec une grande efficacité et une reproduction des basses parfaitement contrôlée. ART 310 est très simple à installer grâce à son incroyable légèreté et de deux inserts M10 pour la suspension.
1007,-
1007,-
RCF ART 725
ART 725 is a passive two-way system with an accurate acoustic design for club installations and live music. Thanks to the high quality compression driver with a 3” voice coil and the 15” woofer, the ART 725 delivers clear high frequencies, punchy bass and full and precise mid frequencies. The new aluminium rear panel is equipped with Speakon in/out connectors.
437,-
437,-
RCF ART 312
L'ART 312 est un haut-parleur à deux voies avec précision la conception acoustique et une technologie innovante de capteurs. Les hautes fréquences sont très précises grâce à la compression driver 1" faibles et puissants sont garantis par des avis de haute puissance woofer 12". L'installation est facile grâce aux 4 inserts M10 pour la suspension de l'armoire.
484,-
484,-
RCF ART 315
ART 315 est une enceinte deux voies qui présente une nouvelle technologie de capteur de conception acoustique et de précision. Un superbe coup de poing de basse est assurée par de très forte puissance et faible distorsion woofer 15". ART 315 est la solution idéale dans les situations où un amplificateur externe est nécessaire. Il est équipé de quatre inserts M10 suspension.
387,-
387,-
RCF ART 310i
L’ART 310-i RCF est une enceinte acoustique à 2 voies à grand angle de couverture. L'ART 310-i est le diffuseur idéal pour toutes situations ou il est nécessaire un rendu PA et des dimensions d'un monitor de studio. Le nouveau woofer en néodymium de 10” est la synthèse d' années d' expérience d' RCF dans le domaine des diffuseurs acoustiques compacts. Elle est dotée d'une bobine de 2,5” avec une puissance très élevée et une reproduction des basses parfaitement controlée. Le moteur à compression utilise un nouveau dome de 1,5” en Mylar avec une phase plug radiale d'une géométrie unique. Ce projet innovant exploite l’élevé flux magnétique du néodymium et garanti une gamme medium du son naturelle et une reproduction extremement précise dans hautes fréquences.
JBL JRX215
This trapezoidal, 15" speaker system is at home in live sound, dance music and speech reinforcement. JBL 15 in low frequency driver with a 64 mm (2.5 in) diameter edgewound ribbon voice coil which provides more cross-sectional wire area in the voice coil gap than round wire designs, for greater efficiency and power handling. JBL 2414H-C 25 mm (1 in ) polymer diaphragm compression driver improves high frequency performance as well as system reliability. The advanced network topology crossover design shapes the frequency response to deliver coherent summation in the crossover region. High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating. Progressive Transition™ high frequency waveguide provides superior coverage control, reduced distortion, and smoother frequency response. The rugged, acoustically superior enclosure is constructed from 19 mm (.75 in ) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for extreme durability and improved low-frequency performance. SonicGuard™ protects the high frequency driver from excess power without interrupting the performance. Non-resonant, all-steel handles are used. Attractive 18-gauge perforated, steel grille protects components from damage. Dual-angle pole-mount socket allows the speakers to tilt 10° for more uniform audience coverage.
JBL JRX212
The JRX212 is a portable, twelve-inch, two-way speaker system designed specifically for live performance stage monitoring applications.JBL 12 in low frequency driver with a 64 mm (2.5 in) diameter edgewound ribbon voice coil which provides more cross-sectional wire area in the voice coil gap than round wire designs, for greater efficiency and power handling. JBL 2414H-C 25 mm (1 in) polymer diaphragm compression driver improves high frequency performance as well as system reliability. The advanced network topology crossover design shapes frequency response and delivers "coherent summation" in the crossover region. High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating. Progressive Transition™ high frequency waveguide provides superior coverage control, reduced distortion, and smoother frequency response. The rugged, acoustically superior enclosure is constructed from 19 mm (.75 in) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for extreme durability and improved low-frequency performance. SonicGuard™ protects the high frequency driver from excess power without interrupting the performance. Non-resonant, all-steel handles are used. Attractive 18-gauge hexagon perforated, steel grille protects components from damage. Dual-angle pole-mount socket allows the speaker to tilt 10°for more uniform audience coverage.
TW Audio M10
An appropriate headline to describe M10, our new multi-functional loudspeaker. We wouldn’t be TW AUDiO if we’d just gone and built a run-of-the-mill ten-inch box, after all. Instead we spent considerable time developing, testing and optimizing a product that combines the advantages of M8 with the power of M12. What we’ve ended up with is a unique product that is more powerful, more compact and even more versatile. M10 shares family strong points such as an M12-derived trapezoidal, asymmetrical cabinet design equipped with our usual grab handles and air-cargo tracks.
Left and right cabinet versions mean paired couples of M10 can be used for high-quality monitoring applications, e.g. as floor monitors laid out in opposing symmetry with HF horns at both ends. Tight spaces don’t bother M10, which inherits M8’s compact design and quartet of perfectly placed cable terminals. As always, an extensive list of add-on equipment boosts adjustability and flexibility. It features the SBM10 swivel bracket, for example. Taking inspiration from SBM12, it gets the same tool-free, easy mounting mechanism. No fiddling with easy-to-lose small parts; just click it into place and go.
M10’s 75 x 50 degree mid-high horn, which provides precise and tightly controlled radiation, also finds its blueprint in M12’s BEM-optimized model. The horn is rotatable by 90 degrees, should the need arise.
There’s more. M12 was the benchmark for M10 in terms of SPL and distortion. M10 therefore features a powerful 1.4 inch HF driver, which enables the separation frequency to be set extraordinarily low for great directness. Certainly a stand-out feature in this class of speaker.
But what good would outstanding, powerful mid-high rendition be without the equivalent low-mid punch? This is where the newly-developed 10-inch chassis comes into play. An extended voice coil and powerful neodymium magnet for extra long, linear throw allow M10 to strike the perfect balance between those highs and lows. It will hold that balance, even when the going gets wild. Separating the two channels is an integrated passive crossover, as per usual. With standard, non-controlled amplification in mind, it is phase coherent and character-optimized. That means M10 can be combined with any other TW AUDiO loudspeaker, including but not limited to M8 or M12.
But what exactly makes M10 unique?
It is the ability to perform in both M8 and M12’s range of operation. The best of both worlds; where an eight-inch speaker falls short by size or lack of directness, M10 delivers. And where a twelve-inch box’s footprint is too large but high output levels and low distortion is essential, M10 fills the gap. A main speaker combined with a passively or actively separated subwoofer, a full-range speaker, a compact monitor with power to spare. Barely visible, but amazingly audible, M10 comes into its own whenever a small shape and big, unmissable sound are of the essence.
TW Audio Vera 36
It would be far too easy just to describe the VERA36 as the big sister of our successful VERA10 system. But just like real sisters, the two do have something in common. Born of of loudspeaker systems and creating new dimensions for professional sound equipment technology, they have both been through many years of development, construction and test phases.
And sometimes those differences can be huge. VERA36 takes on the jobs that her little sister VERA10 prefers to step aside from, with large-scale events in touring business or for installations in large halls and stadiums. And all with familiar TW AUDiO qua- lity. With specially-designed speakers, technically state-of-the-art, in a CNC manufactured, high-quality birch plywood enclousures, finished with a resilientpolyurethane coating, all assembled and tested at our factory in Ludwigsburg.
You could describe the VERA36 as an extraordinarily compact VERtical Array system, coupled with brilliant, crisp speech intelligibility, tone quality and dynamics, and low-mid power you’ve only seen up to now in much bigger systems. High-end sound at the FOH even standing 40 m away.
...that speak for themselves. No fewer than six loudspeakers working in a chassis that’s just 70 cm wide and 31 cm high. The central element is the mid-frequency horn, driven by two 8 inch cone loudspeakers. Coaxially between them is the mid-high soiund unit comprising two 1.4 inch compression drivers and newly-developed waveformer with 10 degree vertical coverage. In the horizontal plane there is the choice between 80 and 120 degree horn. The low-mid range is complemented by two 10 inch long- excursion LF-drivers. The remarkable thing is that below 400 Hz all four cone speakers work together, providing impressive reserves of solid basic tone and punch. This means that the VERA36 doesn’t just hold its own even against some big double-twelve-inch systems...
But it takes more than an impressive sound to make a modern speaker system a success. It needs to be simple and safe to handle and quick to build up and take down as well. VERA36 fulfills these points quite obvious, thanks to the three-point fully-integrated rigging system we have developed. Its innovative adjustment mechanism with logarithmically devided splay angles, guarantees optimal array curving with precise aiming even into the back rows of large locations. Whether you want to rig the array as a caterpillar from the floor up, vertically out from the case or dolly or ground stack it – every variant is possible for putting together up to 24 elements in compliance with BGV C1 health and safety regulations with especial ease.
CLX Bullit 300P
Bullit 300P is a mobile speaker. When connected to the active Bullit 300A they pair up to a high quality mobile sound system with 250 Watts of power.
Guitare electrique Effet guitare Guitare acoustique Piano Scène Gibson Les Paul Microphone Installation Sans Fil Accessoires guitare Partitions Piano numérique Combo DJ Controller Percussion Guitare débutant Casques Basse Batteries électroniques Instrument Bon Marché Fender Stratocaster PA System Monitor studio
du mardi au vendredi :
10h00 - 18h00
Jeudi soir :
19h00 - 21h00
Samedi :
10h00 - 17h00
10h00 - 18h00
Jeudi soir :
19h00 - 21h00
Samedi :
10h00 - 17h00
