DYNACORD M12 MONITOR

Clearance:This is a blow-out product. This product is now available for a very low price. Be quick because stocks are limited! The product is new and usually includes the original packaging. Full warranty applies.
Dynacord M12 Monitor
Product code: 89843
This product is no longer available. Find a similar product:
Passive Speaker  PA-Systems  Dynacord  Monitor 

Dynacord M12 Monitor
Compact in size, with a modern design and offering excellent sound quality, that's how CORUS-Pro Linie speaker systems present themselves in the higher middle class. This 2-way monitor cabinet is the “all-rounder” amongst monitor systems offering high sound pressure level and outstanding intelligibility. The Lo/Mid range between 80 Hz and 4 kHz is reproduced by a Dynacord woofer LFT 3008 while a Dynacord HFT 3008 Constant Directivity horn system transmits frequencies above 4 kHz.

Need more information about the Dynacord M12 Monitor? Call us or send a message using the form on the right!

Product links title
Related search terms title
Click and discover! Find similar products.

SIMILAR PRODUCTS BY DYNACORD...

 1150,-
 1150,-
 Dynacord DLite Sub 115 DYNACORD´s SUB 115 is a vented direct radiating cabinet, equipped with the high-power Electro-Voice EVS15S transducer. The new High-Speed-Laminar-Vent system (patent pending) shows signifi cantly less distortion and lower air noise at low frequencies than common vented cabinets. The SUB 115 has the same dimensions and cosmetics as the powered PowerSub 315 and can directly be connected to the PowerSub 315 for an extended bass fundament. For this application you have to shift the PowerSub 315’s ‘mode switch’ to the position ‘internal+external 2*500W’.The SUB 115 contains a passive fi lter that suppresses high frequencies. Appropriate fullrange cabinets, e.g. DYNACORD’s D12, can therefore be directly connected in parallel to the SUB 115 if an extended bass reproduction is required. You just have to connect the SUB 115 and the fullrange cabinet with a regular Speakon cable. The cabinet is equipped with an electronic circuit called voice coil tracking protection. This circuit senses the terminal voltage of the transducer and simulates the thermal behaviour of the woofer´s voice coil. In case of potential thermal overload the power applied to the speaker is reduced to a safe level. Extremely powerful amps can be used in order to have maximum dynamic range without the danger of thermal overload in non-controlled situations. The voice coil tracking protection exhibits “soft” switching characteristics, so no annoying clicks or pops are audible. The circuitry automatically resets after the voice coil temperature has reached a safe value.
 999,-
 999,-
 Dynacord Dlite D15-3 With the newly designed D15-3, DYNACORD fulfi lls a longtime customer demand for a light-weight, extremely robust high-performance professional 15“ 3-way plastic cabinet for use in professional, portable and fixed install sound reinforcement applications.
 799,-
 799,-
 Dynacord Dlite D12-3 With the newly designed D12-3, DYNACORD fulfills a longtime customer demand for a light-weight , extremely robust high-performance professional 12“ 3-way plastic cabinet for use in professional, portable and fixed install sound reinforcement applications.
 749,-
 749,-
 Dynacord DLite Sub 112 DYNACORD´s SUB 112 is a vented, direct radiating cabinet, equipped with the high-power DYNACORD DND12S400 neodymium transducer. The conical vent system shows significantly less distortion and lower air noise at low frequencies than common circular vent openings.

SIMILAR PRODUCTS BY OTHER BRANDS...

 679,-
 679,-
 Electro Voice TX1152 The Electro-Voice® TX1152 fits the bill when applications that require the low-frequency extension of a 15-inch woofer, with the outstanding pattern control of a larger, rotateable, 60 degree x 40 degree horn. Using the incredibly low-distortion, SMX2150 15-inch woofer, the TX1152 boasts specs normally associated with loudspeakers twice the price. The TX1152's unique Backbone grille not only looks great, but also provides greater strength and damage resistance than simple grille block designs. Proprietary, ergonomically correct handles and angled input panels, and integrated pole mount and six .375-inch threaded suspension inserts make the TX1152 easy to transport and employ in a variety of applications.
 329,-
 329,-
 Electro Voice SB122 With the Electro-Voice SB122, the quest for a compact, lightweight, powerful, and affordable subwoofer is finally over. The SB122 is possibly the smallest, most powerful subwoofer on the planet. It packs 400-watt continuous—and 1,600-watt peak-power handling into a compact 15 kg. package. It also employs the new EVS12SB 12", long-excursion woofer for outstanding low-frequency response. The EVS12SB cast frame transducer created for the SB122 uses the same motor and suspension design as the EVS18S used in EV's larger systems. With nearly 2" of peak-to-peak excursion capability, this is literally a 12" with the heart of an 18". An integral low-pass filter allows the SB122 to be directly connected in parallel with a full-range speaker for truly impressive low-end output without the need for an additional amplifier and processor. The SB122 features a convenient pole-mount socket on top of the enclosure to allow a small full-range speaker such as the Zx1 or Sx80 to be mounted on the optional ASP-1 accessory pole, resulting in a compact system than sounds much bigger than it looks.
 773,-
 773,-
 JBL JRX118SP For those who prefer the simplicity of a self-powered subwoofer, there's the JBL JRX118SP 18" Compact Powered Subwoofer Cabinet.The JBL JRX118SP powered subwoofer incorporates a specially designed amplifier with 500 watts peak and 300 watts continuous power output into the same driver as the non-powered version. It offers a built-in stereo crossover network and peak limiter to protect the amplifier and speaker from clipping. The JRX118SP is designed with a JBL 18" woofer with a cast frame and 3" voice-coil. To minimize distortion due to coil saturation, heavy gauge wire is used for inductors and SonicGuard high-frequency driver protection guards against damage caused by inadvertent overpowering of the system. It features 1/4" and speakon connectors.
 699,-
 699,-
 Electro Voice ZX3 The Electro-Voice® ZX3 offers an unprecedented level of lightweight, 12-inch, two-way, loudspeaker performance for the widest variety of portable and installed applications. Featuring the new DVX3121 12-inch woofer and the ND2 neodymium compression driver, the ZX3 continues the groundbreaking innovation of the EV DVX woofer program, joining the ranks of EV's ZX series between the eight-inch ZX1 and the 15-inch ZX5. When it comes to problem and solution versatility, the ZX3 is in a class of its own. In addition to the highest performance drivers available, a complete range of optional accessories, including the CB-5 array kit, MB3 wall and ceiling-mount bracket, HA-3 handle adapter for use with the VSA-1 strong arm mount, and TCA-1 truss clamp adapter allow the ZX3 to be easily and precisely configured in multiple box arrays, mounted on trusses or tripods, deployed as monitors, or used as system mains with a subwoofer.

OTHER PRODUCTS BY DYNACORD...

 1690,-
 1690,-
 Dynacord DLite PowerSub 312 The PowerSub 312 active 12“ subwoofer, which is equipped with an integrated three-channel power amplifier with a total output of 1300W, was specially conceived to permit the swift and simple creation of a subwoofer satellite system, for which purpose all that is needed is to connect two passive (e.g. DYNACORD D8) loudspeaker systems to the Speakon outputs of the PowerSub 312.
 599,-
 599,-
 Dynacord SL1200 Stable 2 x 600 W Output Power, Class AB Topology, 2 HU. These amplifiers offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems. SL series power amplifiers are equipped with a comprehensive protection package and dynamic limiters. The integrated, switchable Low-Pass Notch filter (a typical DYNACORD special feature) corrects the frequency response and optimizes the transient behaviour of loudspeakers.
 829,-
 829,-
 Dynacord CL800 The smartly designed CL800 provides outstanding audio performance with maximum reliability and operating security at a surprisingly roadie-friendly weight. Boasting Class AB technology, and an optimized power supply with low dispersion toroidal transformers, the CL800 gives you headroom above and beyond the call of duty, and is loaded with safeguards against overheating, overload and short-circuits. CL Series power amplifiers satisfy all the criteria for punishing ‘on the road’ use. They are reliably protected against overheating, overload and short-circuits as well as high frequency and DC at the output. The ‘soft start’ function employs relays to insert a delay between switching on the device and the activation of the power outputs. A further circuit limits the current on power-up, there-by protecting the mains fuses. DYNACORD amplifiers constantly monitor the input- versus the outputsignal by means of super-fast audio processors which send -in case of non-linear operation- control parameters to the limiters. The limiters are thus operating dynamically and do not affect the amplifiers dynamic capabilities as they control the input gain level. Thermal stability is provided by a 3-stage fan with a very low noise level.
 1799,-
 1799,-
Clearance!
 Dynacord PowerMate 1000 MKII All the function groups of the PowerMate are 100% professional in terms of their design and specification. First comes the mixing section, where you will find high-quality, discrete microphone preamps, new, dustproof ALPS faders (specially developed for the PowerMate) with very high attenuation even in the HF range, 48V phantom power switchable to the channels in groups of six and a dynamic range that would put most dedicated professional mixers to shame.