DYNACORD DLITE SUB 118

Dynacord Dlite Sub 118
Call or
mail!
Call or
mail!
Product code: 95336
Stock: Temporarily out of stock. The delivery time for this product is depending on the availability at our supplier. For more information please contact us.
The delivery time for this product is depending on the availability at our supplier. For more information please contact us.
delivery Delivery time on request.

Dynacord Dlite Sub 118
DYNACORD´s SUB 118 is a vented direct radiating cabinet, equipped with the high-power DYNACORD LFS 18700 transducer. The new patented High-Speed-Laminar-Vent system shows signifi cantly less distortion and lower air noise at low frequencies than common vented cabinets. The SUB 118 contains a passive fi lter that suppresses high frequencies. Appropriate fullrange cabinets, e.g. DYNACORD’s D15- 3, can therefore be directly connected in parallel to the SUB 118 if an extended bass reproduction is required. You just have to connect the SUB 118 and the fullrange cabinet with a regular Speakon cable.

Need more information about the Dynacord Dlite Sub 118? Call us or send a message using the form on the right!

SIMILAR PRODUCTS BY DYNACORD...

SIMILAR PRODUCTS BY OTHER BRANDS...

e-mail
e-mail
Yamaha C115V These Yamaha C115V 15" 2-Way Club Concert Series Speakers were engineered to perform flawlessly, delivering a powerful musical experience for both audience and musicians. Featuring exclusive custom-designed electronic components and made in the U.S., they have the capability to rock hard every night and come back for more. Low-gloss, tough-as-nails elastomeric coatings shrug off wear and tear for a consistent professional appearance whether you're around the corner or on the road.
 773,-
 773,-
JBL JRX118SP For those who prefer the simplicity of a self-powered subwoofer, there's the JBL JRX118SP 18" Compact Powered Subwoofer Cabinet.The JBL JRX118SP powered subwoofer incorporates a specially designed amplifier with 500 watts peak and 300 watts continuous power output into the same driver as the non-powered version. It offers a built-in stereo crossover network and peak limiter to protect the amplifier and speaker from clipping. The JRX118SP is designed with a JBL 18" woofer with a cast frame and 3" voice-coil. To minimize distortion due to coil saturation, heavy gauge wire is used for inductors and SonicGuard high-frequency driver protection guards against damage caused by inadvertent overpowering of the system. It features 1/4" and speakon connectors.
 799,-
 799,-
Electro Voice ZX5 90B The Electro-Voice® Zx5 is a 15-inch, two-way cabinet with the most elegant, high-impact, composite enclosure, featuring the newest generation of EV components: the all-new DXV3150 500-watt, 15-inch woofer and the all-new, two-inch neodymium ND2 compression driver. The Zx5 is rated for 600-watt, long-term power handling and is able to produce high SPLs while providing a very smooth frequency response. With two available coverage patterns (60 degree x 60 degree or 90 degree x 50 degree), two adjustable monitor angles (45 degrees or 55 degrees) and ten built-in rigging and suspension points allow for a variety of mounting accessories, the Zx5 fits a variety of applications such as installations of individual speakers or clusters in entertainment, houses-of-worship, as well as on stage with bands, musicians, and PA rental companies.
 799,-
 799,-
Electro Voice ZX5 60B Electrovoice Zx5-60B Cabinet Speaker - 15-Inch 2-Way Loudspeaker System, 600W, 60x60 Coverage Pattern, 1-Inch Exit Neodymium Compression Driver, High Sensitivity, Adjustable Monitor Angle. The Zx5 is a 15-inch, 2-way cabinet with the most elegant high-impact composite enclosure, featuring the newest generation of EV components: the all-new DXV3150, 500W, 15-inch woofer and the all-new 2-inch neodymium ND2 compression driver. The Zx5 is rated for 600 watts long-term power handling and is able of producing high SPLs whilst providing a very smooth frequency response. With two available coverage patterns (60-degrees x 60-degrees or 90-degrees x 50-degrees), two adjustable monitor angles (45- or 55-degrees) and ten built-in rigging and suspension points allowing for a variety of mounting accessories, the Zx5 fits a variety of applications: installations of individual speakers or clusters in entertainment, cultural or religious venues, as well as on stages with bands, musicians and P.A. rental companies.

OTHER PRODUCTS BY DYNACORD...

 2595,-
 2595,-
Dynacord DLite PowerSub 315 The active 15” subwoofer PowerSub 315 with four integrated digital power amps provides total output power of 2000W and has been designed for the quick and easy set-up of subwoofer satellite systems.
 1150,-
 1150,-
Dynacord DLite Sub 115 DYNACORD´s SUB 115 is a vented direct radiating cabinet, equipped with the high-power Electro-Voice EVS15S transducer. The new High-Speed-Laminar-Vent system (patent pending) shows signifi cantly less distortion and lower air noise at low frequencies than common vented cabinets. The SUB 115 has the same dimensions and cosmetics as the powered PowerSub 315 and can directly be connected to the PowerSub 315 for an extended bass fundament. For this application you have to shift the PowerSub 315’s ‘mode switch’ to the position ‘internal+external 2*500W’.The SUB 115 contains a passive fi lter that suppresses high frequencies. Appropriate fullrange cabinets, e.g. DYNACORD’s D12, can therefore be directly connected in parallel to the SUB 115 if an extended bass reproduction is required. You just have to connect the SUB 115 and the fullrange cabinet with a regular Speakon cable. The cabinet is equipped with an electronic circuit called voice coil tracking protection. This circuit senses the terminal voltage of the transducer and simulates the thermal behaviour of the woofer´s voice coil. In case of potential thermal overload the power applied to the speaker is reduced to a safe level. Extremely powerful amps can be used in order to have maximum dynamic range without the danger of thermal overload in non-controlled situations. The voice coil tracking protection exhibits “soft” switching characteristics, so no annoying clicks or pops are audible. The circuitry automatically resets after the voice coil temperature has reached a safe value.
 1690,-
 1690,-
Dynacord DLite PowerSub 312 The PowerSub 312 active 12“ subwoofer, which is equipped with an integrated three-channel power amplifier with a total output of 1300W, was specially conceived to permit the swift and simple creation of a subwoofer satellite system, for which purpose all that is needed is to connect two passive (e.g. DYNACORD D8) loudspeaker systems to the Speakon outputs of the PowerSub 312.
 2149,-
 2149,-
Dynacord PowerMate 1000 MK3 The third generation of the PowerMate satisfies all requirements, delivering the accustomed concert sound performance with no hint of compromise. Here the perfection of every component reflects the passion of the developers. The PowerMate 1000 MK III features 6 Line + 4 Stereo Line channels, and a Class D amplifier for 2 x 1000 Watts.