POWER AMPLIFIER ...

Free shipping: place your online order today and save big. Lowest prices in Europe! (*=min. amount € 50,-)
12345Next »
 599,-
 599,-
 Dynacord SL1200 Stable 2 x 600 W Output Power, Class AB Topology, 2 HU. These amplifiers offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems. SL series power amplifiers are equipped with a comprehensive protection package and dynamic limiters. The integrated, switchable Low-Pass Notch filter (a typical DYNACORD special feature) corrects the frequency response and optimizes the transient behaviour of loudspeakers.
 945,-
 945,-
 Dynacord CL1200 The new Compact Linear Precision Series power amplifiers combine outstanding audio performance with maximum reliability and operating security as well as being markedly lighter than equivalent power amplifiers. Through the use of an optimized power supply with low dispersion toroidal transformers as well as of Class H technology (CL 800 Class AB), a large amount of headroom above the specified nominal output has been achieved along with a considerable reduction in weight and thermal leakage. Dynacord CL Series power amplifiers satisfy all the criteria for punishing on the road use. They are reliably protected against overheating, overload and short-circuits as well as high frequency and DC at the output. The soft start function employs relays to insert a delay between switching on the device and the activation of the power outputs. A further circuit limits the current on power-up, there-by protecting the mains fuses. DYNACORD amplifiers constantly monitor the input versus the output signal by means of super-fast audio processors which send, in case of non-linear operation, control parameters to the limiters. The limiters are thus operating dynamically and do not affect the amplifiers dynamic capabilities as they control the input gain level. Thermal stability is provided by a 3-stage fan with a very low noise level. The inputs are electronically balanced and implemented on XLR connectors, whilst direct outs for looping the signal are also standard. Input routing permits the choice between Mono and Stereo modes. Mono bridged mode is also easy to realize thanks to the separate Bridged Out connectors and the Bridged Mode switch.
 839,-
 839,-
 Electro Voice Q1212 With 2 x 1200 W @ 4 Ohms and 2 x 1800 W @ 2 Ohms, the Q1212 offers the horsepower to challenge the legendary P3000. It provides the same power from a 2 RU chassis at modest weight, making it a perfect subwoofer or high-power top drive for Phoenix, Tour X and Zx3/Zx5 systems or system combinations.
 685,-
 685,-
 Electro Voice Q99 The Q99 is based on a compact, highly efficient Class-H design. Delivering 2 x 900 W @ 4 Ohms and 2 1500 W @ 2 Ohms, the Q99 can deliver as combined top & sub drive for most club-sized systems, such as Tour X or QRx.
 469,-
 469,-
 Electro Voice Q44 The Q44 is based on EV´s reference-standard P-Series. It guarantees the same high-quality construction and output, with a maximum power capability of 2x450 watts @4 Ohms. The Q44 is designed for cost-limited, mobile applications and an excellent choice for small fullrange tops and utility loudspeakers, such as ZX1, Sx Series or EVID series.
 459,-
 459,-
 HK Audio Elements EA600 Pow… Housed in an enclosure that shares the same design as the mid/ high unit, the EA 600 amp module delivers 600 watts at 4 ohms. It can drive up to two passive E 110 Sub subwoofers or one passive subwoofer with up to two E 435 mid/ high units or one column with up to four mid/ high units. The power amp module is ventilated from the front. A rotary selector lets you choose a special EQ setting to match the number of connected E 435s and optimize the frequency response for a column of that height.
 2439,-
 2439,-
 Crown XTi6002 There's no debate – when you choose Crown's XTi 2 Series, you're choosing one of the most powerful and innovative amplifiers on the market today. That's because the all-new XTi 2 Series amps continue to set the standard for unmatched performance and value, delivering the goods night after night without breaking a sweat.
 359,-
 359,-
 Koch LB120 II LoadBox This innovative ‘multi-tool’ should be found in every serious guitar players’ kit, as a solution to many possible situations. We understand that quality, tone and clarity are important to guitar players, so by creating the Loadbox with extra heavy duty components, stainless steel housing and a host of features, we believe that we have met those criteria. As a straight output power attenuator, the Loadbox can handle a continuous 120 watts at any of 7 output levels with unparalleled clarity and without loss of tone. The user also has the choice of various outputs to channel the attenuated signal through…single or multiple cabinets (depending on impedance), padded or non-padded direct outputs, a transformer balanced XLR DI output and line output for PA/Recording which both share voicing switches for microphone placement and cabinet style. 8 Ohm Version.
e-mail
e-mail
 Vestax VDA1000 MK2 The VDA-1000MKII is a digital power amplifier designed for the new generation of computer DJs. Despite the size, a radiation fan has been newly equipped to help reduce heat generated from the ampilifier. It is, highly portable and provides a powerful 1000W output suitable for sound systems of computer remix DJs, bedroom DJs, restaurant PA's and mobile DJs. The unique compact design and multi inputs expand to several applications. With the latest digital amplification technology offering significant lower heat dissipation, the VDA-1000MKII has combined the warmth of analog sound and high power output within its compact and portable design.
e-mail
e-mail
 Dynacord SL900 Stable 2 x 450 W Output Power, Class AB Topology, 2 HU. These amplifiers offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems. SL series power amplifiers are equipped with a comprehensive protection package and dynamic limiters. The integrated, switchable Low-Pass Notch filter (a typical DYNACORD special feature) corrects the frequency response and optimizes the transient behaviour of loudspeakers.
e-mail
e-mail
 Dynacord CL1600 The new Compact Linear Precision Series power amplifiers combine outstanding audio performance with maximum reliability and operating security as well as being markedly lighter than equivalent power amplifiers. Through the use of an optimized power supply with low dispersion toroidal transformers as well as of Class H technology (CL 800 Class AB), a large amount of headroom above the specified nominal output has been achieved along with a considerable reduction in weight and thermal leakage. Dynacord CL Series power amplifiers satisfy all the criteria for punishing on the road use. They are reliably protected against overheating, overload and short-circuits as well as high frequency and DC at the output. The soft start function employs relays to insert a delay between switching on the device and the activation of the power outputs. A further circuit limits the current on power-up, there-by protecting the mains fuses. DYNACORD amplifiers constantly monitor the input versus the output signal by means of super-fast audio processors which send, in case of non-linear operation, control parameters to the limiters. The limiters are thus operating dynamically and do not affect the amplifiers dynamic capabilities as they control the input gain level. Thermal stability is provided by a 3-stage fan with a very low noise level. The inputs are electronically balanced and implemented on XLR connectors, whilst direct outs for looping the signal are also standard. Input routing permits the choice between Mono and Stereo modes. Mono bridged mode is also easy to realize thanks to the separate Bridged Out connectors and the Bridged Mode switch.
 829,-
 829,-
 Dynacord CL800 The smartly designed CL800 provides outstanding audio performance with maximum reliability and operating security at a surprisingly roadie-friendly weight. Boasting Class AB technology, and an optimized power supply with low dispersion toroidal transformers, the CL800 gives you headroom above and beyond the call of duty, and is loaded with safeguards against overheating, overload and short-circuits. CL Series power amplifiers satisfy all the criteria for punishing ‘on the road’ use. They are reliably protected against overheating, overload and short-circuits as well as high frequency and DC at the output. The ‘soft start’ function employs relays to insert a delay between switching on the device and the activation of the power outputs. A further circuit limits the current on power-up, there-by protecting the mains fuses. DYNACORD amplifiers constantly monitor the input- versus the outputsignal by means of super-fast audio processors which send -in case of non-linear operation- control parameters to the limiters. The limiters are thus operating dynamically and do not affect the amplifiers dynamic capabilities as they control the input gain level. Thermal stability is provided by a 3-stage fan with a very low noise level.
e-mail
e-mail
 Electro Voice Q66 Q66II - the versatile workhorse of the new Q series amplifiers delivers 2 x 600W @4Ohms / 2 x 900W @2Ohms and provides flexible drive capability for a huge variety of speaker systems, including Sx300, ZX4, SB122 etc. Switchable LPN(Low-Pass Notch) filter circuitry provides extra tonal fundament and kick, with protective Low-Cut for using smaller passive 12" or 15" cabinets without additional subwoofers.
e-mail
e-mail
 Electro Voice CP4000S The flagship of EV's Precision Series Compact amplifiers is the CP4000S. With up to 2x2100 watts into two ohms, and 2x1500 watts into four ohms, and only 19.2 lbs (8.7 kg), it is both the most powerful and lightweight model in the line. The CP4000S is state-of-the-art and can be used for any application. It is specifically designed to allow for long-term driving of low loads into subwoofers without stress. The CP4000S's combination of reliability and pleasing, rich sound make it the first choice for all mid and hi-range speaker cabinets.
e-mail
e-mail
 Crown XLS402D The XLS Series of power amplifiers from Crown represents a new era in affordable,quality power amplification. The line consists of five models in a uniform, rugged 2U chassis (3U in the XLS 5000), incorporating the best of tried-and-true design principles and innovative features.The five models in the series are the XLS 202, XLS 402, XLS 602, XLS 802, and XLS 5000. They are identical except for output power and weight. XLS Series amplifiers are professional stereo power amplifiers engineered to meet demanding audio requirements—reliably and within budget. Every XLS Series amplifier is backed by Crown’s unequaled Three-Year, No-Fault, Fully Transferable Warranty that covers everything. With over five decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. So check out the affordable Crown XLS Series. They are a powerful argument for quality and value!
e-mail
e-mail
 Electro Voice CP3000S The CP3000S is not only the first Precision Series amplifier to use a switch-mode power supply, but also the first switch-mode amplifier with EV’s Precision Series sound. With up to 2x1600 watts into two ohms, and 2x1100 watts into four ohms, and only 17.96 lbs (8.15 kg), it is both powerful and lightweight. The CP3000S is state-of-the-art and can be used for any application. It is specifically designed to allow for long-term driving of low loads into subwoofers without stress. The CP3000S's combination of reliability and pleasing, rich sound make it the the first choice for all mid and hi-range speaker cabinets.
e-mail
e-mail
 Electro Voice CP2200 The Electro-Voice® CP2200 is from the compact and lightweight Compact Precision Series of professional amplifiers. The high efficient Class-H design reduces the power dissipation significantly and allows for more amplifier channels and output power in a given rack space. The audio performance of the CP2200 is state-of-the art and fulfills the highest sound expectations in demanding applications from concert sound to theater.
e-mail
e-mail
 Electro Voice CP1800 Electro-Voice's new Precision Series Compact amplifiers offer proven Precision Series performance and reliability in a new compact, lightweight format. This is made possible by incorporating a highly efficient Class-H design, which results in considerably less heat being generated. This allows the overall size of the amplifier to be reduced substantially without sacrificing performance or reliability. The CP1800 supplies up to 2 x 900 watts into 2 ohms and 2 x 600 watts into 4 ohms. Dedicated for smaller full-range speaker systems and hi-frequency components in multiway systems.
e-mail
e-mail
 Electro Voice CP1200 Electro-Voice’s new Precision Series Compact amplifiers offer proven Precision Series performance and reliability in a new compact, lightweight format made possible by a highly efficient Class-H design, which generates considerably less heat. The CP1200 supplies up to 2x600 watts into two ohms, and 2x400 watts into four ohms. Designed for small, full-range cabinets and individual, hi-frequency components in multiway systems. The CP1200 uses a conventional transformer power supply.
e-mail
e-mail
 Crown XLS802D The XLS Series of power amplifiers from Crown represents a new era in affordable,quality power amplification. The line consists of five models in a uniform, rugged 2U chassis (3U in the XLS 5000), incorporating the best of tried-and-true design principles and innovative features.The five models in the series are the XLS 202, XLS 402, XLS 602, XLS 802, and XLS 5000. They are identical except for output power and weight. XLS Series amplifiers are professional stereo power amplifiers engineered to meet demanding audio requirements—reliably and within budget. Every XLS Series amplifier is backed by Crown’s unequaled Three-Year, No-Fault, Fully Transferable Warranty that covers everything. With over five decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. So check out the affordable Crown XLS Series. They are a powerful argument for quality and value!
e-mail
e-mail
 QSC GX3 GX Series amplifiers are ideal for professional entertainers who require maximum performance and portability on a limited budget. QSC designers, headed by Pat Quilter, have optimized output and appearance while reducing raw material cost and weight. It's all here – dramatic styling, easy hookup and adjustments, excellent audio quality and QSC reliability.
e-mail
e-mail
 Dynacord PM2600 The PM2600 4-channel controlled power amplifier provides an overall output power capacity of 2600 watts into 4 ohms. Although being suitable for universal use, the amplifier has been mainly designed to easily accomplish professional active 2-way sound reinforcement installations incorporating full-range loudspeaker systems and sub woofers. This controlled power amplifier provides an integrated PowerMax12 frequency crossover, several processor-controlled functions, equalizers for matching the sound to acoustic necessities of the location or to the incorporated loudspeaker cabinets respectively, as well as extensive protection circuitry.
e-mail
e-mail
 Crown XTi1002 There's no debate – when you choose Crown's XTi 2 Series, you're choosing one of the most powerful and innovative amplifiers on the market today. That's because the all-new XTi 2 Series amps continue to set the standard for unmatched performance and value, delivering the goods night after night without breaking a sweat.
e-mail
e-mail
 Crown XTi2002 There's no debate – when you choose Crown's XTi 2 Series, you're choosing one of the most powerful and innovative amplifiers on the market today. That's because the all-new XTi 2 Series amps continue to set the standard for unmatched performance and value, delivering the goods night after night without breaking a sweat.
12345Next »
Related newsitems:
August 4th, 2011
The Epiphone Les Paul Ultra III: Tradi…
We all know that deep down, most guitarists love the classic designs and shapes. That's why Epiphone designed the new Les Paul Ultra-III with the same look and features of a traditional Les Paul but added new technology giving you a guitar that's a real Les Paul but also so much more! Two Great Pickup Systems At the heart of the new Ultra-III are two pickup systems. Powering the first are Epiphone's new ProBucker humbucking pickups patterned after Gibson's famous BurstBuckers. With authentic 18% nickel silver base and cover, Elektrisola wire, accurate bobbins, slugs and screws and sand casted Alnico-II magnets, they replicate that classic "Patent Applied For" airy tone that defined rock and roll. The second system features Shadow Germany's patented NanoMag pickup embedded discretely at the end of the fingerboard. Featuring three samarium cobalt magnets, an air coil, and active electronics, this low-impedance pickup captures all the subtle body acoustics and string harmonics. Toge…
July 5th, 2011
Ampeg Brings All-Tube Tone With New GV…
Ampeg re-enters the world of premium guitar amplification with the announcement of the GVT Series Guitar Amps, due out this summer. Each head, cab and combo offers all-tube guitar tone in a sleek design inspired by classic Ampeg guitar amps from the ‘70s. “Over the years, Ampeg guitar amps have delivered an alternative to the standard tones of the time,” remarks Ampeg’s Director of Amplification, Pyotr Belov. “The all-new GVT line is no different. It can easily handle a wide range of playing styles, but does so with pure Ampeg guitar tone that easily outshines the leading tube amps.” The comprehensive line of Ampeg GVT Guitar Amps range from an ultra-compact 5-watt head, all the way up to a gig-friendly 50-watt, 2x12 combo. GVT heads and combos are all-tube by design, including 6V6 and 6L6 power tubes for unmistakable American feel and tone. The tonal palette is wide, featuring Ampeg’s legendary Baxandall EQ circuitry, which provides unmatched flexibility, allowing the guitaris…
July 28th, 2009
Apogee GiO USB Guitar Interface for Mac
GiO is the complete guitar interface for Apple’s new Logic Studio 9, MainStage 2 and GarageBand ’09. Combining effects control, recording functions and amazing sound quality, GiO delivers total access to incredible sounding guitar amps and effects in a single foot controller and interface. Designed to work with the new Logic Studio 9 and MainStage 2, GiO allows guitar players to control recording functions, preset changes and plug-ins like Amp Designer and Pedalboard, along with new Playback and Loopback features in MainStage. With GarageBand 09, GiO is truly plug-and-play and lets users quickly connect their guitar, select and control built-in Amps and stompboxes, and record. Software Control with GiO Stomp on it. Effects control without the mouse. Imagine finding your sound without going back and forth from your guitar to your Mac. With GiO, you can audition effects presets in GarageBand, Logic and MainStage, and turn effects on and off while playing or recording... all w…
March 20th, 2009
Vox introduces AC4TV amps
Vox Amplification has released the AC4TV, a 4-watt, class-A tube amplifier based on the Vox AC4 from the 1960s.The AC4TV combo, as well as the AC4TVH head version, is an all- tube practice amp that has been factory-modded with a premium transformer and select components for optimum tone. Improving on the hardware of its vintage counterpart, this new class-A version retains the distinctive EL84 power tube of the original and features a 12AX7 powered pre-amp, driving the AC4TV's custom-made Celestion 10-inch speaker and the extension cabinet's custom- made 12-inch speaker. These features enable both models to deliver clean crunch or saturated overdrive for a range of sonic options. Both models feature simple cabinetry with the TV front design first used on the AC15 from 1958.
More news »