Free shipping: place your online order today and save big. Lowest prices in Europe! (*=min. amount € 50,-)
999,-
999,-
Dynacord Dlite D15-3
With the newly designed D15-3, DYNACORD fulfi lls a longtime customer demand for a light-weight, extremely robust high-performance professional 15“ 3-way plastic cabinet for use in professional, portable and fixed install sound reinforcement applications.
799,-
799,-
Dynacord Dlite D12-3
With the newly designed D12-3, DYNACORD fulfills a longtime customer demand for a light-weight , extremely robust high-performance professional 12“ 3-way plastic cabinet for use in professional, portable and fixed install sound reinforcement applications.
459,-
459,-
Dynacord Dlite D8
The D 8 is a light-weight, robust 8“/1”, 2-way plastic cabinet for professional sound reinforcement applications. With a variety of suspension accessories and conservative cosmetics, the D 8 is ideally suited to be used in demanding fixed installations.
749,-
749,-
Dynacord DLite Sub 112
DYNACORD´s SUB 112 is a vented, direct radiating cabinet, equipped with the high-power DYNACORD DND12S400 neodymium transducer. The conical vent system shows significantly less distortion and lower air noise at low frequencies than common circular vent openings.
2595,-
2595,-
Dynacord DLite PowerSub 315
The active 15” subwoofer PowerSub 315 with four integrated digital power amps provides total output power of 2000W and has been designed for the quick and easy set-up of subwoofer satellite systems.
1690,-
1690,-
Dynacord DLite PowerSub 312
The PowerSub 312 active 12“ subwoofer, which is equipped with an integrated three-channel power amplifier with a total output of 1300W, was specially conceived to permit the swift and simple creation of a subwoofer satellite system, for which purpose all that is needed is to connect two passive (e.g. DYNACORD D8) loudspeaker systems to the Speakon outputs of the PowerSub 312.
1150,-
1150,-
Dynacord DLite Sub 115
DYNACORD´s SUB 115 is a vented direct radiating cabinet, equipped with the high-power Electro-Voice EVS15S transducer. The new High-Speed-Laminar-Vent system (patent pending) shows signifi cantly less distortion and lower air noise at low frequencies than common vented cabinets. The SUB 115 has the same dimensions and cosmetics as the powered PowerSub 315 and can directly be connected to the PowerSub 315 for an extended bass fundament. For this application you have to shift the PowerSub 315’s ‘mode switch’ to the position ‘internal+external 2*500W’.The SUB 115 contains a passive fi lter that suppresses high frequencies. Appropriate fullrange cabinets, e.g. DYNACORD’s D12, can therefore be directly connected in parallel to the SUB 115 if an extended bass reproduction is required. You just have to connect the SUB 115 and the fullrange cabinet with a regular Speakon cable. The cabinet is equipped with an electronic circuit called voice coil tracking protection. This circuit senses the terminal voltage of the transducer and simulates the thermal behaviour of the woofer´s voice coil. In case of potential thermal overload the power applied to the speaker is reduced to a safe level. Extremely powerful amps can be used in order to have maximum dynamic range without the danger of thermal overload in non-controlled situations. The voice coil tracking protection exhibits “soft” switching characteristics, so no annoying clicks or pops are audible. The circuitry automatically resets after the voice coil temperature has reached a safe value.
599,-
599,-
Dynacord SL1200
Stable 2 x 600 W Output Power, Class AB Topology, 2 HU. These amplifiers offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems. SL series power amplifiers are equipped with a comprehensive protection package and dynamic limiters. The integrated, switchable Low-Pass Notch filter (a typical DYNACORD special feature) corrects the frequency response and optimizes the transient behaviour of loudspeakers.
945,-
945,-
Dynacord CL1200
The new Compact Linear Precision Series power amplifiers combine outstanding audio performance with maximum reliability and operating security as well as being markedly lighter than equivalent power amplifiers. Through the use of an optimized power supply with low dispersion toroidal transformers as well as of Class H technology (CL 800 Class AB), a large amount of headroom above the specified nominal output has been achieved along with a considerable reduction in weight and thermal leakage. Dynacord CL Series power amplifiers satisfy all the criteria for punishing on the road use. They are reliably protected against overheating, overload and short-circuits as well as high frequency and DC at the output. The soft start function employs relays to insert a delay between switching on the device and the activation of the power outputs. A further circuit limits the current on power-up, there-by protecting the mains fuses. DYNACORD amplifiers constantly monitor the input versus the output signal by means of super-fast audio processors which send, in case of non-linear operation, control parameters to the limiters. The limiters are thus operating dynamically and do not affect the amplifiers dynamic capabilities as they control the input gain level. Thermal stability is provided by a 3-stage fan with a very low noise level. The inputs are electronically balanced and implemented on XLR connectors, whilst direct outs for looping the signal are also standard. Input routing permits the choice between Mono and Stereo modes. Mono bridged mode is also easy to realize thanks to the separate Bridged Out connectors and the Bridged Mode switch.
2149,-
2149,-
Dynacord PowerMate 1000 MK3
The third generation of the PowerMate satisfies all requirements, delivering the accustomed concert sound performance with no hint of compromise. Here the perfection of every component reflects the passion of the developers. The PowerMate 1000 MK III features 6 Line + 4 Stereo Line channels, and a Class D amplifier for 2 x 1000 Watts.
1269,-
1269,-
1329,-
1329,-
Dynacord PowerMate 600-2
The integration of mixing console, power amplifier and effects devices in a compact and modern unit reaches a new high with the PowerMate 600. With 6 Mic/Line as well as two Stereo/Line channels, two mixable 24-bit effects devices, a 7 band master equalizer and integrated 2 x 300 W power amplifier, the PowerMate 600 is the absolute allround solution for a multitude of applications, ideally suited to the needs of both single entertainers and small bands. For schools, clubs or similar institutions, the PowerMate is the perfect tool for a wide range of sound reinforcement tasks. Safe and easy to carry, fast and simple to set up, intuitive and uncomplicated to operate, the smallest member of the PowerMate.
1799,-
1799,-
Clearance!
Dynacord PowerMate 1000 MKII
All the function groups of the PowerMate are 100% professional in terms of their design and specification. First comes the mixing section, where you will find high-quality, discrete microphone preamps, new, dustproof ALPS faders (specially developed for the PowerMate) with very high attenuation even in the HF range, 48V phantom power switchable to the channels in groups of six and a dynamic range that would put most dedicated professional mixers to shame.
e-mail
e-mail
Dynacord DLite D12
With the newly designed D12, DYNACORD fulfills a longtime customer demand for a light-weight , extremely robust highperformance professional 12“ 2-way plastic cabinet for use in professional, portable and fixed install sound reinforcement applications.
e-mail
e-mail
Dynacord Dlite Sub 118
DYNACORD´s SUB 118 is a vented direct radiating cabinet, equipped with the high-power DYNACORD LFS 18700 transducer. The new patented High-Speed-Laminar-Vent system shows signifi cantly less distortion and lower air noise at low frequencies than common vented cabinets. The SUB 118 contains a passive fi lter that suppresses high frequencies. Appropriate fullrange cabinets, e.g. DYNACORD’s D15- 3, can therefore be directly connected in parallel to the SUB 118 if an extended bass reproduction is required. You just have to connect the SUB 118 and the fullrange cabinet with a regular Speakon cable.
e-mail
e-mail
Dynacord DSP260
With the DSP 260 digital 2-in-6 sound system manager, DYNACORD is continuing its proud tradition in the field of innovative digital signal processors. Based on the most modern hardware, this system manager offers tried-and-tested as well as new algorithms for the simple and swift construction of active multi-way systems. As much importance has been attached here by the developers to high user-friendliness as to the realization of an extremely favorable price. 24-bit sigma-delta AD/DA converters and a 32-bit floating-point signal processor make possible a dynamic range of 111 dB.
e-mail
e-mail
Dynacord AM12
The AM12 is an active 2-way loudspeaker system that has been designed for use in stage-monitoring or general sound reinforcement applications. The multitude of connection and setting facilities (MIC, LINE, and AUX) allows using the AM12 in many creative ways. You can use the AM12 as on-stage monitor speaker, small PA system or even for sound reinforcement during presentations and similar events. Employing only quality speaker components and a sophisticated modern power amplifier design, the AM12 generates outstandingly high sound pressure level offering maximum sound performance. The integrated high-efficiency power amps provide 300W/4ohms for the Lo range channel and 60W/8ohms for the Hi range channel, supplying sufficient output power and reliable operation for all your sound reinforcement applications. The Extension Speaker Speakon-type connector allows connecting an additional passive monitor, like the M12 or an external subwoofer and using the integrated Acoustic Processing Section provides all the controls you need to adjust the AM12’s sound to individual applications or acoustic conditions.
e-mail
e-mail
Dynacord DLite D12A
The DYNACORD D12A is a powered, biamped, light-weight and extremely robust high-performance professional 12” 2-way plastic cabinet for use in professional portable sound reinforcement applications.
e-mail
e-mail
Dynacord SL900
Stable 2 x 450 W Output Power, Class AB Topology, 2 HU. These amplifiers offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems. SL series power amplifiers are equipped with a comprehensive protection package and dynamic limiters. The integrated, switchable Low-Pass Notch filter (a typical DYNACORD special feature) corrects the frequency response and optimizes the transient behaviour of loudspeakers.
e-mail
e-mail
Dynacord CL1600
The new Compact Linear Precision Series power amplifiers combine outstanding audio performance with maximum reliability and operating security as well as being markedly lighter than equivalent power amplifiers. Through the use of an optimized power supply with low dispersion toroidal transformers as well as of Class H technology (CL 800 Class AB), a large amount of headroom above the specified nominal output has been achieved along with a considerable reduction in weight and thermal leakage. Dynacord CL Series power amplifiers satisfy all the criteria for punishing on the road use. They are reliably protected against overheating, overload and short-circuits as well as high frequency and DC at the output. The soft start function employs relays to insert a delay between switching on the device and the activation of the power outputs. A further circuit limits the current on power-up, there-by protecting the mains fuses. DYNACORD amplifiers constantly monitor the input versus the output signal by means of super-fast audio processors which send, in case of non-linear operation, control parameters to the limiters. The limiters are thus operating dynamically and do not affect the amplifiers dynamic capabilities as they control the input gain level. Thermal stability is provided by a 3-stage fan with a very low noise level. The inputs are electronically balanced and implemented on XLR connectors, whilst direct outs for looping the signal are also standard. Input routing permits the choice between Mono and Stereo modes. Mono bridged mode is also easy to realize thanks to the separate Bridged Out connectors and the Bridged Mode switch.
829,-
829,-
Dynacord CL800
The smartly designed CL800 provides outstanding audio performance with maximum reliability and operating security at a surprisingly roadie-friendly weight. Boasting Class AB technology, and an optimized power supply with low dispersion toroidal transformers, the CL800 gives you headroom above and beyond the call of duty, and is loaded with safeguards against overheating, overload and short-circuits. CL Series power amplifiers satisfy all the criteria for punishing ‘on the road’ use. They are reliably protected against overheating, overload and short-circuits as well as high frequency and DC at the output. The ‘soft start’ function employs relays to insert a delay between switching on the device and the activation of the power outputs. A further circuit limits the current on power-up, there-by protecting the mains fuses. DYNACORD amplifiers constantly monitor the input- versus the outputsignal by means of super-fast audio processors which send -in case of non-linear operation- control parameters to the limiters. The limiters are thus operating dynamically and do not affect the amplifiers dynamic capabilities as they control the input gain level. Thermal stability is provided by a 3-stage fan with a very low noise level.
2499,-
2499,-
Dynacord PowerMate 1600 MK3
The third generation of the PowerMate satisfies all requirements, delivering the accustomed concert sound performance with no hint of compromise. Here the perfection of every component reflects the passion of the developers. The PowerMate 1600 MK III features 12 Line + 4 Stereo Line channels, and a Class D amplifier for 2 x 1000 Watts.
e-mail
e-mail
Dynacord PowerMate 2200 MK3
The third generation of the PowerMate satisfies all requirements, delivering the accustomed concert sound performance with no hint of compromise. Here the perfection of every component reflects the passion of the developers. The PowerMate 2200 MK III features 18 Line + 4 Stereo Line channels, and a Class D amplifier for 2 x 1000 Watts.
e-mail
e-mail
Dynacord PM2600
The PM2600 4-channel controlled power amplifier provides an overall output power capacity of 2600 watts into 4 ohms. Although being suitable for universal use, the amplifier has been mainly designed to easily accomplish professional active 2-way sound reinforcement installations incorporating full-range loudspeaker systems and sub woofers. This controlled power amplifier provides an integrated PowerMax12 frequency crossover, several processor-controlled functions, equalizers for matching the sound to acoustic necessities of the location or to the incorporated loudspeaker cabinets respectively, as well as extensive protection circuitry.
Tuesday - Friday:
10:00 AM - 6:00 PM
Thursday evening:
07:00 PM - 9:00 PM
Saturday:
10:00 AM - 5:00 PM
10:00 AM - 6:00 PM
Thursday evening:
07:00 PM - 9:00 PM
Saturday:
10:00 AM - 5:00 PM
